2017 Wethepeople Envy

The best gets better – with all-round pro-team inspired geometry for skatepark/street/dirt and everything in between. The 2017 Wethepeople Envy is built around the highest quality after-market cromoly frame and fork, featuring the best of WTP, Saltplus and éclat aftermarket parts. Also, the Envy boasts oversize clamping 25.4mm WTP Hydra stem and Envy bars, and the BEST wheelset around with WTP Supreme female hubs laced to éclat Raven rims, and finished off with Stickin’ tyres. If you were to take this spec sheet into a bike shop, buy all the same parts and set this up as a custom bike, it’d easily cost half as much again – this bike is THAT good.


Frame: WETHEPEOPLE “Envy” frame, 4130 full sanko, tapered CS and SS, removable pivots & guides , intg. chain tensioner
Fork: WETHEPEOPLE “Envy” fork, full 4130 sanko with post liquid heat-treated, 1pc cnc steerer, 28mm offset
Bars: WETHEPEOPLE “Envy” bars full 4130 sanko, post liquid heat-treated, 25.4mm clamping
Grips:  ÉCLAT Bruno Hoffmann “Bruno” Vex compound grips & ÉCLAT “Corx v2” steel insert barends
Stem: WETHEPEOPLE “Hydra” cnc alloy top loading stem, 25.4mm clamp, 26mm rise, 50mm reach
Headset: SALTPLUS “Echo” int. headset, sealed bearing
Gyro: no / holes for removable gyro tabs
Lever: ÉCLAT “Sniper” hinged alloy brake lever, two finger version
Brakes: ÉCLAT “Talon” u-brake and bridge cable rear
Cranks: WETHEPEOPLE “Legacy” 2.5 pc crank, crmo, 170mm, 48T spline, 22mm spindle
BB:  ÉCLAT “CNC” mid size, press fit, sealed bearing
Pedals:  ÉCLAT “Slash” nylon/fiberglass pedals
Chain: SALTPLUS “WARLOCK” halflink chain
Sprocket  WETHEPEOPLE “4Star” 6016-T6 alloy, cnc, 26t sprocket
Driver: 9t, 1pc cassette driver, R&L switch driver, IGUS bushing
Front Hub:  WETHEPEOPLE “Supreme” hub, 3/8s” female bolts, 36h
Rear Hub:  WETHEPEOPLE “Supreme” cassette hub, sb, 9T, 12mm female bolt, 36h
Front Rim:  ECLAT “Raven” straight double wall rim, 36h, flash welded
Rear Rim:  ECLAT “Raven” straight double wall rim, 36h, flash welded
Seat: ÉCLAT “Oz” thick padded pivotal seat
Seat Post: ÉCLAT “Torch” alloy pivotal seat post 230mm
Seat Clamp: integrated seat clamp
Tyres: ÉCLAT Bruno Hoffmann “Predator” 2.30″ front & rear
Weight: 11.53kg / 25.42lbs (as pictured)

W.T.P Envy | Elite Series | Gold Nickel | £999.99
W.T.P Envy | Elite Series | Gold Nickel | £999.99

WETHEPEOPLE Envy Geometry:

Top Tube Length:  21”
Chain Stay Length: 13.55”
Head Tube Angle: 75°
Seat Tube Angle: 71°
Bottom Bracket Height: 11.5”
Stand Over Height: 8.75” | 9″
Bar Rise: 9.2“
Bar Width: 29.25”
Bar Back Sweep: 11°
Bar Up Sweep: